At one time, the creation of a dollhouse was a strangeness known to only a take few highly trained artisans. Dollhouses were commissioned works, available only to the highly wealthy. Mass-production techniques combined with newer materials and tools, however, made the construction of dollhouses a project that can be performed by anything with a reasonable level of carpentry talent and experience.
Your first step is to create the dollhouse. Once you have terminated this step and have a clear idea of exactly what you want the terminated product to be, you are ready to begin construction. You have two choices. You can buy a ready-to-assemble dollhouse kit, or you can create the dollhouse thoroughly from raw materials.
Dollhouse
A dollhouse kit, by its very nature, will not be as endlessly customizable as a dollhouse built from scratch. However, a wide collection of kits is currently available on the market, enabling you to choose one that closely fits your vision. If you are uncertain about your carpentry skills, you may want to buy a kit.
If you choose to build the dollhouse from scratch, you will need to decide on the type of material you want to use. Wood is the most traditional. However, some types of wood work good than others. If you want the dollhouse to be reasonably sturdy and able to be handled, plywood is ordinarily a good choice. 3/4" plywood is the most durable selection for the floor and structural components. 3/8" is accepted for non-structural walls, doors and the roof.
Draw out a pattern on paper. You should have a pattern for every highlight of the house including the base. Remember to keep the scale that you superior (most ordinarily 1:12) in place. Be sure to mark your walls and doors as well.
Cut out the pattern and use the pattern to mark the wood. Although the wood can be cut by hand, a circular saw and perhaps a jigsaw will make your job both easier and less time consuming. Pre-drill holes with an electric drill in the corners of all openings such as windows and doorways.
Once the pieces are cut, you will want to sand all of the edges smooth. A plane may be important if the cuts are uneven, otherwise simple sandpaper will suffice. Use a rough grain first and discontinue sanding with a fine grain.
After all of your pieces are sanded smooth, you are ready to join them together. Use a thin layer of wood glue and a series of tasteless nails. Small screws can also be used for added stability. Be sure to drive all screws flush and countersink all nails. Sand again over the terminated nails or screws.
If you want to paint the dollhouse, you have two options. You can paint the pieces individually before assembly, or you can paint the whole dollhouse once it is assembled. There are pros and cons to both methods. The recipe you take will finally be based on your painting skills and the create you envision for the dollhouse.
Building a dollhouse can be as clarify or as simple a project as you would like. If your carpentry skills are not advanced, a dollhouse kit will allow you to do more clarify construction. If you are sure in your skills, then designing and construction your own dollhouse will allow maximum freedom. The decisions are thoroughly up to you.
construction a Dollhouse
ไม่มีความคิดเห็น:
แสดงความคิดเห็น